Skip to product information
1 of 1

Fusion Mineral Paint

TUNG OIL

TUNG OIL

Regular price $23.00 CAD
Regular price Sale price $23.00 CAD
Sale Sold out
Shipping calculated at checkout.
Size

Low stock: 9 left

Tung Oil is another natural wood finishing oil that is easy to apply, has no VOCs, protects and enhances your wood gives you a water-resistant finish and is easy to maintain. Sounds great right? Let’s dive into a guide to Tung Oil and find out what the differences are between Tung Oil vs Hemp Oil. 

Pure or Polymerized Tung Oil – What’s the difference?

Pure Tung Oil contains no thinners or driers in it, making it food safe and eco-friendly. Polymerized Tung Oil which is more commonly found in your local hardware or woodworking shop, has thinners or driers in it. Typically these can be quite toxic. Our Tung Oil is 100% Pure Unpolymerized. We recommend you using our Odorless Solvent to cut your Tung Oil to help it penetrate bare wood more, and to dry faster if this is desired. Our Odorless Solvent is the safest on the market, It is 99.7% monomer free ( this is what causes the headaches).

How does it work?

Unlike a Varnish or Water-based poly coating, Tung Oil and Hemp Oil are breathable. Now, what does that mean exactly? Because these oils are from natural pressed seeds with no additives or solvents, they do not leave a plastic coating or film like conventional topcoats, like polyurethane or varnish. The oil saturates the wood, seals it from moisture from within. You will never have chipping, flaking or peeling! At least 2 coats are recommended, however the more coats, the more protection. You will want to re-coat every few years as the wood starts to look dull and dry. Re-coating is simple and easy, as you will not have to sand, or removing any peeling/flaking paint, just add oil, like a conditioner

What surfaces and projects can you use these natural oils on?

You can use Tung oil on all raw and properly prepped wooded surfaces. It is also a great finished to use over the top of Milk Paint as the Milk Paint is porous it absorbs into the paint binding with it to provide a water-resistant finish natural tactile finish. We recommend for outdoor projects as it has slightly more water resistance than Hemp Oil.

  • Floors
  • Furniture
  • Kitchen cabinets/islands
  • Doors & windows
  • Woodwork, walls & ceilings
  • Food surfaces
  • Exterior Surfaces

Benefits of Tung Oil

These oils adjust to the expansion and contraction of wood from temperature and humidity and are able to release any moisture trapped within. Typical paints and finishes that contain synthetics do not offer this flexibility, and the surface of them will break as the moisture within the wood is trying to escape. They also do not scratch like conventional plastic coatings.

  • Revive old dry looking wood
  • Water-Resistant
  • Alcohol resistant
  • Matte to a satin-matte finish
  • Ideal for food surface (without the use of odourless solvent)
  • Interior and exterior use

#FUNFACT – You can use Tung Oil to finish concrete, stone brick and even bamboo!

Cut the Oil with Mineral Spirits

Thinning the oil with odorless solvent helps it penetrate the surface and speeds up the dry time. Subsequent coats can be full strength but must be wiped down after 15 minutes. Always allow ample drying time (48 hours+).  Using it without the solvent the dry time is longer. If you have used a solvent to cut the Tung Oil it is no longer a food-safe finish.

Applying the oil

After the surface has been prepped by removing any debris, or unwanted previous poly coating, you may proceed to apply the Tung Oil finish. Apply the Tung Oil generously with a brush or cloth. Let the wood soak in the Tung Oil for approximately 5-10 minutes. Remove the excess Tung Oil within 10 minutes of application, if you leave the Tung Oil on for too long and it dries it may go sticky and tacky, you don’t want the Tung Oil to start drying on the surface you want all the excess removed.

https://youtu.be/vkQbBtbI78s





www.fusionmineralpaint.com

View full details