Gel Stain: Double Espresso

Our Gel Stain and Topcoat is a one step combination product which is a little bit of stain mixed into a durable topcoat. Some of the colours can be a thick gel or a thin consistency. As you stir the product it becomes less gel like and is easy to brush on. Multiple coats will create a more opaque finish but the sheen will remain matte. Keep in mind your substrate colour will always show through, however with the more coats you apply the more opaque it will become, except Patina as it is our “clear”.

This product is ideal for over all types of surfaces, scratched, uneven, unstable due to chipping as with milk painted surfaces, melamine, laminate, pre painted or stained wood surfaces. It’s so versatile!

This oil based brush on gel stain produces a durable protective urethane coating with satin finish that is ideal for heavily used interior surfaces. It adheres to difficult surfaces and is available tinted to help easily camouflage imperfections or achieve an antiquing effect. Fusion Gel Stain is perfect for areas that are washed frequently such as table tops, bathroom vanities, coffee tables, desks, shelving and even floors. It Resists water, food stains, alcohol, grease and detergents.

Gel Stain is available in 4 colours; Greystone, Double Espresso, Black and Patina (which doubles a protective topcoat)

Greystone – Just as it sounds, also lightly pigmented, this translucent warm grey is reminiscent of stone. Perfect to add a bit of a grey tone with your topcoat.

Double Espresso – This coffee brown Gel Stain and Topcoat is the darkest and heavily pigmented of them all. For those projects that need more of a coverup it is easy to achieve a rich and almost opaque finish with 2 coats.

Black – A lightly pigmented Gel Stain and Topcoat in a translucent black. Perfect to add a bit of a black tone while you topcoat.

Patina – Just as the name states, our “clear” Gel Stain and Topcoat is a very durable finish that will give your piece a patina affect.

Quick Facts

This product is a brush on and NOT a wipe on or wipe back product.
Use a natural bristle brush or a roller to apply.
Dries to the touch in 8 hours and can be re-coated at that time
Has a thicker gel like consistency – each color varies.
Long open time and self leveling.
Comes in quart size only in 4 different colours.
1 coat looks like a stain. Subsequent coats get more opaque.
Satin finish.


IDEAL SURFACES

Laminate, Lacquered, previously painted or coated surfaces.
Damaged or Scratched surfaces
Almost a no prep product- just clean and remove any wax or grease. No sanding or de-glossing required to apply this.
Extremely durable. Excellent for Flooring and heavy use kitchen table tops etc.
Works on Bare Wood surfaces for a beautiful satin finish.


CLEAN UP AND CURE TIME

Gel Stain is an Oil Based Urethane that includes a protective top coat
Mineral Spirits for clean up
Dries to the touch in 8 hours
Cures in 5 Days
PREPARATION
Clean surface of wax or grease. Sanding is NOT required on your clean and dry surface. Adheres well to old finishes. Two coats may be required if the old finish has been worn down to expose a different substrate or the blemishes are severe. If there is an area where there is an old finish as well as any peeling areas you will need to remove (ensure you take precautions if old surface is a lead based coating) the loose peeling substrate until you have a sound surface.



CLEAN UP AND THINNER
Odourless mineral spirits.



SURFACE PREPARATION
Apply to a clean sound surface free of grease, oil, dirt, shellac or dust. Do not apply to a surface that is wet, or on asphalt, shellac, vinyl or linoleum tile.



APPLICATION
Stir thoroughly before applying. Do not shake as you will introduce bubbles. Appears as a coloured gel until stirred. Dries to a satin sheen in the colour of your choosing. (One coat is translucent – subsequent coats can build to a solid color. Test your methods in an inconspicuous area.) Using a brush (or very short nap roller – NOT a foam roller-avoid air bubbles). Dry time is approximately 4 hours at 25°C and 50% relative humidity on most porous surfaces and can be longer if applied thickly or to completely sealed surfaces. Apply a thin coat in a dust free area. Wait 4 hours before recoating if needed. Remember to always test for tackiness prior to re-coating – if it’s still tacky wait another few hours and re-test. (if subsequent coats are desired or surface feels bumpy give a light sanding and remove dust before recoating. If applying to brand new raw wood, the first coating should be thinned by 20% by using 1 part mineral spirits and 4 parts gel stain (dry time will be much shorter on this initial coat). When dry area can be lightly used in 24 to 48 hours. Takes approx. 5 days to cure.



COVERAGE
Approx 120 sq ft -Additional coats will achieve a darker, deep rich colour.

www.fusionmineralpaint.com